The verdict
Both companies make quality PEMF devices, and neither is a scam. But for most buyers, the Healthy Wave Multi-Wave is the stronger purchase, and it is where I would start. It costs roughly half of what a Bemer Evo set does, is far more configurable (6 waveform combinations and 30 frequencies against Bemer's one fixed signal at 2 frequencies), adds far infrared heat and red light in the same mat, and backs it all with a much friendlier return policy.
Bemer's advantages are real but narrow: it is the only one of the two with spot applicators for targeted areas, its controller interface is slicker, its flat mat carries a longer full warranty (3 years against 2.25), and Bemer pays the return shipping if you send it back. If spot applicators are the thing you actually need, none of the rest of this page changes that.
We may earn a commission on purchases through this link.
Side-by-side specs
Everything below comes from each company's own published specifications as of July 2026. Where a number is not published, I say so.
| Spec | Healthy Wave Multi-Wave | Bemer (Evo sets) |
|---|---|---|
| Price (new) | $995 – $2,495 by size; full size (74 x 28 inches) is $2,495 | $4,590 for the Basic set, up to $5,890 for the Premium set |
| Wave types | 2: a square wave, plus a sine-based proprietary Healthy Wave signal | 1: the proprietary Bemer signal, a patented cascading sine pulse train |
| Pulse widths | 3 (Medium 16 ms, Fast 5 ms, Ultra Fast 0.5 ms), giving 6 total waveform combinations | Not adjustable |
| Frequency | 30 settings, 1 – 30 Hz | 2 settings: 10 Hz and 33 Hz |
| Intensity | 5 levels (10 to 100 percent). Multi-Wave controller: peak 5+ Gauss, average surface 1.5 Gauss. Also ships with a second, simpler Classic White 5-Therapy controller: peak 15+ Gauss, average surface 3.5 Gauss. | Mat: 10 settings, 0.035 – 0.35 Gauss. Spot applicators: up to 1.5 Gauss. |
| Controllers included | 2 (advanced programmable unit, plus the simpler higher-intensity Classic White) | 1 (B.Box) |
| Programs | 12 presets (ten 20-minute, two 1-hour); fully custom single-step or 4-stage programs you can save; auto timer runs 20 minutes on, 100 minutes off | 2 frequency settings and 10 intensity steps; 8-minute sessions recommended |
| Coils | 8 copper PEMF coils distributed across the mat | Coil count not published |
| Other therapies | Far infrared heat (amethyst, jade, and tourmaline crystals), negative ions, and red light included | PEMF only in the main sets; red light (B.Light) only in the separate Beauty-Pack Evo |
| Spot applicator | None; your body has to be on the mat | Yes (B.Pad and B.Spot in higher sets); mat and spot applicator can run at the same time |
| Mat feel | Heavier and semi-rigid (crystals plus coils); best used on a firm, flat surface | Flexible and light |
| Signal history | Configurable by design | Signal unchanged since 2007; a used 2007 Bemer 3000 delivers the same PEMF as a new Evo |
Healthy Wave Multi-Wave vs Bemer Evo sets: published specifications, July 2026.
Note A note on the intensity numbers.
Bemer's 0.35 Gauss is its published maximum mat intensity. Healthy Wave publishes both peak and average-surface figures measured at the mat surface. These are different framings, so I will not claim an exact like-for-like multiple. What does hold up: even by its average-surface figures (1.5 Gauss on the advanced controller, 3.5 Gauss on the Classic White), the Multi-Wave's ceiling is several times the Bemer mat's 0.35 Gauss maximum, while its lowest setting sits near the Bemer's typical range.
What Bemer does well
This site exists because I think Bemer buyers deserve straight answers, and the straight answer here is that the Bemer is a well-made device with a few genuine advantages.
- Spot applicators. The higher Evo sets include the B.Pad and B.Spot, and the mat and a spot applicator can run at the same time. If you want a full-body session while an applicator sits on one knee or shoulder, Bemer is the only one of these two that does it.
- Controller experience. The B.Box interface is polished and simple: two frequency settings, ten intensity steps, short 8-minute recommended sessions. There is very little to learn.
- Longer full mat warranty. Bemer's 3-year full warranty covers the mat and the controller, with two-way shipping on valid claims. Healthy Wave's full mat coverage runs 2.25 years.
- Bemer pays return shipping. If you return within the window, Bemer provides the return label. Healthy Wave asks you to cover return shipping.
- Light, flexible mat. The Bemer mat rolls up and travels easily. The Multi-Wave, with its crystal layers and coils, is heavier, semi-rigid, and belongs on a firm flat surface.
Where the Multi-Wave wins
One recipe versus a full kitchen
The Bemer delivers one fixed, patented signal at two frequencies: 10 Hz and 33 Hz. That signal has not changed since the Bemer 3000 in 2007, which we cover in our Bemer PEMF technology review.
The Multi-Wave takes the opposite approach: two wave types across three pulse widths for 6 waveform combinations, 30 frequency settings from 1 to 30 Hz, five intensity levels, and two controllers in the box, including the simpler Classic White unit that runs the mat at a higher intensity ceiling.
Why does configurability matter? A macro-analysis covering 335 PEMF studies found positive results scattered across a wide range of frequencies and intensities, with no single winning signal. The Multi-Wave's two wave types are built on the two most-researched waveform families, sine and square. Bemer's cascade waveform, by contrast, appears only in Bemer's own studies. A configurable mat can be set close to what a given study actually used; a fixed signal is one recipe, take it or leave it.
The NASA question, answered plainly
Bemer's marketing often mentions NASA. The facts: Bemer signed a non-reimbursable agreement with NASA, valued at roughly $10,500, to work on a garment prototype, and that agreement expired in 2021. The famous NASA PEMF study, published in 2003, is a separate thing entirely: it used a 10 Hz square wave at roughly 200 milligauss. The Multi-Wave can be set close to that configuration, a square wave at 10 Hz on a low intensity level. The Bemer cannot produce a square wave at all.
Three therapies in one session
The Multi-Wave adds far infrared heat from amethyst, jade, and tourmaline crystal layers, negative ions, and red light, all in the same mat. Bemer's main sets are PEMF only; red light comes only via the B.Light in the separate Beauty-Pack Evo. Infrared in particular carries its own independent research base, which matters in the evidence section below.
Returns and warranty: read this before either purchase
Healthy Wave: 90 days, full refund
The Multi-Wave carries a 90-day, 100 percent money-back guarantee, returnable for any reason, including the simple reason that you did not notice results. The mat needs to come back in good condition, and you pay the return shipping.
On warranty: the controller carries a 5-year full warranty with shipping included. The mat carries 2.25 years of full coverage, followed by a 5-year limited warranty with 10 to 30 percent deductibles, shipping not included.
That controller number is the one to notice. In any PEMF system the controller is the failure-prone component: it switches transistors rapidly, and the resulting heat cycling is what wears electronics out. Five years of full controller coverage beats Bemer's three.
Bemer: 30 days, minus 10 percent
Bemer gives you 72 hours to cancel for a full refund. After that you have a 30-day return window, but Bemer keeps a 10 percent restocking fee, and the unit must come back in the original box with all components, acceptable and undamaged. To Bemer's credit, it provides the return label and pays the return shipping.
Bemer's warranty is a 3-year full warranty on the mat and controller with two-way shipping on valid claims. The battery and the B.Light are covered for only 6 months.
To be fair to Bemer on two points: its 3-year full mat coverage outlasts Healthy Wave's 2.25-year full mat term, and Bemer covering return shipping is a genuine courtesy Healthy Wave does not match.
Circulation and pain: what the evidence actually says
Circulation is Bemer's headline claim, so I went looking for where its circulation evidence comes from. Of eight published Bemer circulation studies, three are independent: one found no difference, one concluded Bemer did not enhance the measured outcomes, and one reported positive results but ran without a control group. The other five all came from Bemer's partner institute, all positive; that institute has since permanently closed.
Meanwhile, independent research not funded by either company supports both infrared heat and PEMF as being studied for circulation. The Multi-Wave is the only one of these two mats that delivers both at once.
On pain, the picture is similar. Bemer's studies show benefit mainly as an adjunct, alongside physical therapy or chiropractic care. Far infrared has independent clinical trial support for low back pain. And PEMF studies on knee osteoarthritis used frequencies and intensities within the Multi-Wave's adjustable range, with improvement reported. PEMF is studied for these uses; neither mat treats or cures any condition, and neither company may legally claim otherwise.
Our full breakdown of the research is in our Bemer therapy benefits guide. For a deeper study-by-study explorer across brands, see our sister site HealthMatReview.
Caution This page is a buying comparison, not medical advice.
PEMF and infrared devices are not intended to diagnose, treat, cure or prevent any disease, and nothing here is a treatment recommendation. Talk to your doctor before starting any new therapy, especially if you are pregnant, have an implanted electronic device such as a pacemaker, or are managing a serious condition.
The buy-and-try test
For a device this expensive that you cannot demo in a store, the return policy is the risk. So run the numbers on trying each one.
Try a Bemer Evo Basic and return it on day 25, and the 10 percent restocking fee costs you $459 of your $4,590. Try a full-size Multi-Wave and return it on day 85, and you get the entire $2,495 back, minus only your return shipping. Ninety days at 100 percent against thirty days at 90 percent is not a small difference on purchases this size.
New for new, the math is blunt: $2,495 for the full-size Multi-Wave against $4,590 to $5,890 for a Bemer Evo set. Smaller Multi-Wave sizes start at $995.
What about buying a Bemer used? It narrows the gap but rarely closes it: a used Bemer set in good shape often still lists for more than a brand-new Multi-Wave, and the used unit comes with no warranty and no return window. Our used Bemer price guide tracks current asking prices by model, and the used marketplace shows live listings.
One thing money does not buy here is extra safety, because there is no safety gap to pay for. Both mats operate well inside ICNIRP public exposure limits, and both companies hold FDA registration as Class II devices under the 510(k) pathway, which we explain in our FDA approval guide. On safety, call it a tie.
By the numbers
Frequency settings
Selectable PEMF frequencies on each device.
Waveform combinations
Wave types multiplied by pulse widths.
Full-size price, new
Published new list prices, July 2026.
Text version: frequency settings, Multi-Wave 30, Bemer 2. Waveform combinations, Multi-Wave 6, Bemer 1. Full-size new list price, Multi-Wave $2,495, Bemer Evo Basic $4,590.
Frequently asked questions
Is Bemer or Healthy Wave better for pain?
Both have supportive PEMF evidence for pain, mostly as an add-on to other care. The Multi-Wave also delivers far infrared heat, which has independent clinical trial support for low back pain, so one session combines two studied therapies.
Which is better for circulation?
Independent research supports both PEMF and infrared heat for circulation, and the Multi-Wave runs both at once. Bemer's positive circulation results come mostly from a partner institute that has since closed; the three independent Bemer studies were mixed.
How different is the PEMF between the two mats?
The Multi-Wave offers 6 waveform combinations and 30 frequency settings; the Bemer runs one fixed signal at 2 frequencies. The Multi-Wave also reaches a higher intensity ceiling, though the two companies measure intensity differently, so the numbers are framings rather than an exact multiple.
Are Bemer and Healthy Wave mats safe?
Yes, by every published measure. Both operate well inside ICNIRP public exposure limits, and both are FDA-registered Class II devices. On safety I call it a tie.
Why does a Bemer cost so much more?
Bemer sells through independent distributors who earn commissions on every sale, which builds markup into the price. The PEMF signal itself has not changed since the Bemer 3000 in 2007. Our Bemer Group review covers how that distribution model works.
Is a used Bemer cheaper than a new Healthy Wave?
Usually not. A used Bemer set in good shape often still lists for more than a brand-new Multi-Wave, and a used unit comes with no warranty and no return window. Our used Bemer price guide tracks current asking prices if you want to check.
Bottom line
If spot applicators or the lightest possible mat matter most to you, the Bemer earns its place. For everyone else, the Multi-Wave delivers more adjustability, more therapies, and a longer, cleaner trial period at roughly half the price of a new Bemer set. That is the lowest-regret buy of the two, and it is the one I would put my own money on. If what you actually want is heat rather than PEMF, read our Bemer vs Biomat comparison instead.
We may earn a commission on purchases through this link.
